Diagnostics:
Browser:
UI Version:
Transport:
Layers
Maritime
US Weather Radar
World Satellite Infrared
Traffic
Weather Forecast
Oil
Iridium Satellites
Inmarsat Satellites
Globalstar Satellites
Orbcomm Satellites
Comm. Satellites
GSE Layer
Radar Reflectivity
Light
Heavy
Asset Type Position Details Time
  Priority Asset Type Description Resolution Procedure Position Time Acknowledge
Are you sure you want to delete the asset group "{0}"? This cannot be undone.
History:
Fuel Odometer Difference Fuel efficiency Deviation Source Date/Time  
Are you sure you want to delete this fillup? This cannot be undone.
Name Lat/Lng Message Created On Status ETA Distance To Updated On  
Are you sure you want to delete this waypoint? Deleting a waypoint simply removes it from the portal and not the asset.
Driver Login Login On Logout Logout On Duration Trip Review Notes Source
Login Driver

Current Driver Information:
Driver Status  
Ignition Meter 1 Meter 2 Meter 3 Meter 4 Odometer Date/Time
Time Distance Time Distance Time Distance Time Distance Time Distance
Are you sure you want to delete the asset '{0}'? This cannot be undone.
or
(PNG, 18x18 pixels)
Icon

General Information


 
Photo

SIM Information

Driver Information

Vehicle Information

Vessel Information

Input - Digital Pin
# Pin Label IDP Config AVL Config ARC Config On Label Off Label N/O SOS
Input - Analog Pin
# Pin Label AVL Source ARC Config Unit Factor Behavior Full Value Fuel Cap. Max Weight
Output
# Pin Label ARC Config On Label Off Label Pulse Label
Current Status Information:
Status Yes No Unknown Status Yes No Unknown
Moving Engine On
Speeding Idling
Towing Dwelling
In Low Power Mode On Backup Power
Antenna Cut GPS Jammed
Cell Jammed Alarm Count
  Edit Name Description Condition Filters Remove From Alert

Are you sure you want to remove {0} from the {1} alert?

 
Are you sure you want to delete this message? This cannot be undone.
Are you absolutely sure you want the clear the position and message history for {0}? THIS CANNOT BE UNDONE.


Determine the optimal route from your starting point, optional ending point, and series of waypoints.

    Click on the map to add points to the ruler. You can move existing points by clicking and dragging them.


    Total distance:
    Are you sure you want to delete the place "{0}"? This cannot be undone.
    Either click the map to choose a position or enter a lat/lng.

    (decimal degrees)
    (decimal degrees)
    I/O Settings Address Time
      Title Address View Time

    Prio. Message Address Time Via Ack.  
    Type Message   Via Created On Sent     Sent On      
      Prio. Type Resolution Position Time Ack.
    -
    Request Location (Ping)
    Set Reporting Interval
    Set Reporting Interval
    minutes
    Request Location (Ping)
    Set Parameters
    Parameter Value Parameter Value
    select all | select none
    minutes minutes

    Include additional assets in request

    Groups:

    Assets:
    Included:



    Not Included:
    select all select all

    Include additional assets in request

    Groups:

    Assets:
    Included:



    Not Included:
    select all select all

    Include additional assets in request

    Groups:

    Assets:
    Included:



    Not Included:
    select all select all

    Include additional assets in request

    Groups:

    Assets:
    Included:



    Not Included:
    select all select all
    meters


    Include additional assets in request

    Groups:

    Assets:
    Included:



    Not Included:
    select all select all
    Emergency Destination:


    Leave fields blank to keep them unchanged. Note that any parameter change will also reset the device.

    minutes
    minutes
    minutes
    Kilometers per hour (kph)





    Show Events:
    You can upload a KML (Keyhole Markup Language) file to quickly add geofences or places. A KML file can be generated from Google Earth, ArcGIS, or other geographic information systems. Once uploaded, you will be able to confirm the Places and Geofences you would like to import.

    Places:
      Geofences:
        Prev [{0} of {1}] Next
        Add segment/shape:
        Segments:
        • No sections added yet.
        Are you sure you want to delete the geofence '{0}'? This cannot be undone.
        Are you sure you want to delete document '{0}'? This cannot be undone.
        Gateway Counters:
        Last Reset On:
        Satellite GPRS
        0 | 0 0 | 0
        Request Location (Ping):
        Reset Terminal:
        Report Position AVL Garmin FMI Garmin Dispatch GarminExt J1939 Analytics Utility ARC FLS VMS Unibox Time
          SIN Name Enabled Enable / Disable
        • Position -
        • Report -
        • ARC -
        • AVL -
        • GarminFMI -
        • GarminDispatch -
        • GarminExt -
        • J1939 -
        • Analytics -
        • Utility -
        • FLS -
        • VMS -
        • Unibox -
        Active SIM Network Allowed Link Stability RSSI Power On Status Cover Open SIM Status Network Status APN Connected Server Connected Current Mode SIM 1 Present SIM 2 Present Time
        Wakeup Period Mobile Initiated Message Reference Time
        Hw Major Hw Minor Sw Major Sw Minor Product Wakeup Period Last Reset Reason Virtual Carrier Beam Vain Operator Tx State User Tx State Broadcast ID Count Time
        SatCnr CellRssi Power Up Time Batt Charger State Batt Volt. Ext Volt. Temp Ports AVL - Current AVL services states Digital I/O States - When special function inputs are active Time
        1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 In LPM On Main Power Speeding Moving Towing GPS Jammed Cell Jammed Tamper Blocked Seatbelt Violation Ignition On Engine Idling SM1 Active SM2 Active SM3 Active SM4 Active Geo Dwelling Ignition On Seatbelt Buckled SM1 Active SM2 Active SM3 Active SM4 Active
        SIN PIN Value  

        Time Command Sent Response Success
        Last Queried:
        Last Response:
        Parameter Value Parameter Value

        Device - Portal
        ID Enabled Inside Outside ID Fence Alert Filters  
        Last Queried:
        Last Response:
        Parameter Value Parameter Value
        select all | select none
        Movement Detection
        Speeding
        Time-Based Reporting
        Distance-Based Reporting
        Service Meter Reporting Interval
        Turn by Turn
        Long Drive
        Security
        Idling Control
        Geofence
        Low Power Mode
        Towing
        Odometer
        Harsh Braking
        Harsh Acceleration
        Accident Detection
        Seatbelt
        Accident Data Capture
        Driver iButton

        Last Queried:
        Last Response:
        Parameter Value Parameter Value
        select all | select none
         
         
        Sensor Reporting
        Sensor 1
        Sensor 2
        Sensor 3
        Sensor 4

        Last Queried:
        Last Response:
        Parameter Value Parameter Value
        select all | select none
        Basic Report
        System
        Power
        Message
        Position
        Log
        EIO
        Cell
        EEIO
        Accel

        Last Queried:
        Last Response:
        Parameter Value Parameter Value
        select all | select none
         
        Last Queried:
        Last Response:
        Parameter Value Parameter Value
        select all | select none
         

        Latitude Longitude Supported Protocols Unit Id Product Id Sw Ver Time
        Last Queried:
        Last Response:
        Property Value Property Value
        select all | select none
        EIO 1
        EIO 2
        EIO 3
        EIO 4
        General

        Request Heartbeat:
        Last Queried:
        Last Response:

        Are you sure you want to activate terminal "{0}" on gateway account "{1}"? Activation charges will be applied. Please contact your Solution Provider for details.
        Are you sure you want to deactivate terminal "{0}" on gateway account "{1}"? Deactivation charges may be applied. Please contact your Solution Provider for details.
        minutes
        Parameter Value Parameter Value

        Parameter Value

        Reset Device:
        Reset Device Configuration:
        Delete Data:







        Set Odometer:
        Map Version:
        Software Version:
        Parameter Value Parameter Value
        select all | select none
        Auto Arrival
        Engine State Detection
        Power Off Mode
        Safe Mode
        Speed Limit Events
        Estimated Time Of Arrival
        Motion Detection
        Time Clock
        Dispatch Text
        Privacy Control
        Odometer Calibration
        Aggressive Driving Accelerometer Configuration

        Are you sure you want to reset the device? Resetting the device will delete data from the device and servers, reset the device's configuration back to defaults, and reboot the device.
        Are you sure you want to reset the device's configuration back to its defaults?
        Software Version:
        Last Queried:
        Last Response:
        Parameter Value Parameter Value
        select all | select none
         
         
         
         
         
         

        Loading...
        Not connected. Retrying in {0}s... Reload
        Not connected. Reconnecting...
        Loading....
        Request Location (Ping)
        AORW AORE POR IOR
        Reboot Device:
        Request Location (Ping):
        Last Queried:
        Last Response:
        Parameter Value Parameter Value
        Ignition

        Upgrade to RedPort Tracking Pro

        Upgrade your account to a RedPort Tracking Pro account to receive the following benefits: